e+e- COLLIDER DETECTOR Revised 3/2001 - DESIGN SD

Component

Radius (cm)

Min

Max

Axial (cm) Z| 

Min

Max

Technology

Performance

Vertex Detectors (layer 1) 1.2   -2.5 2.5 CCD 4.5u+5.5 u /psin3/2
Vertex Detectors (layer 2-5) 2.4, 3.6, 4.8, 6   -12.5 12.5 CCD 4.5u+5.5 u /psin3/2
Central Tracking 21

46

71

96

121

122

  -126

-126

-126

-126

-126

-126

126

126

126

126

126

126

Si strips (delta)/P2~6x10-5 high p

(delta)P/P~0.4% low p

Forward Tracking 20

20

20

125

125

125

+/-136

+/- 159

+/- 182

 

 

 

 

 

Si discs (delta)/P2~6x10-5 high p

(delta)P/P~0.4% low p

EM Calorimeter 

Barrel
End Cap
 
78
24
 
103
70
 
-180
152.5
 
180
177.5
Tungsten/Si pads (delta)E/E~ 12%/(root) E +1%
Coil Magnet 129 158 -178 178 SC Solenoid

~1/2 (lambda) thick

6 Tesla

Hadron Calorimeter

Barrel
End Cap
 
188
26
 
286.8
178
 
-269
189
 
269
287.8
Cu/Scintillator (delta)E/E~50%/(root)E +2%

Muon Detector

Barrel
End Cap
 
300
25
 
420
303
 
-298
298
 
298
418
Fe/gas  
Luminosity Monitor 6 15 151 176 Tungsten/Si   

 

Vertex Dector   

    5 layers of CCD's                      0.12 -- per xo layer

           radii of layer    1                 1.2cm,  5 cm long

                                      2                2.4cm,  25 cm long

                                      3                 3.6cm,  25 cm long

                                     4                 4.8cm,  25 cm long

                                      5                 6.0cm,  25 cm long

           CCD's                 20 u x 20u pixels

                                      point error ~ 5u

Central Tracker

           Silicon u strips 

           Layer              1                    21

                                  2                     46

                                  3                     71

                                  4                     96

                                  5                    121

                                  6                    122

EM Calorimeter

            Tungsten/Silicon pad readout

            Tungsten xo = 0.35cm, (lambda) =9.6cm

            Structure:

                    50 layers:                 2 mm Tungsten

            total thickness 25cm

                    100 mm of Tungsten/3.5mm = 29 xo total,~ 1(lambda) 

            segmentation             1.5 cm x 1.5 cm pads

                                                 1.5 mrad x 15 mrad

                                                 50 longitudinal layers

Hadronic Calorimeter

            Copper/Scintillator towers

                    Cu     (lambda) =14.8cm

            Copper

            38 layers of: 20mm Copper

                                     5mm Scintillator

             total thickness 95 cm = 5.1  lambda

         EM + Had Calorimter                 6.1 lambda

        Segmentation of HCal

                        Transverse      40 mrad x 40 mrad

                        Longitudinal - 3 segments

Muon detectors - 32 Iron plates, 5 cm thick each

        5 cm thick Fe plates with gas chambers inside in 1.5 cm gaps.

         Continuous pad structure of hadron calorimeter for tailcatcher.

        Position resolution

                    10 layers - 1 cm in theta direction

                    2 layers   - 1 cm in Z direction


Last Modified: 01/13/04 12:57